Fragen im Vorstellungsgespräch: Embedded software engineer

2724

Fragen aus Vorstellungsgesprächen für „ Embedded Software Engineer“, von Bewerbern geteilt

Top-Fragen in Vorstellungsgesprächen

Sortieren: Relevanz|Beliebtheit|Datum
Qualcomm
Embedded Software Engineer wurde gefragt...21. Mai 2020

Given the following struct definition in C, what would sizeof(myStruct) return? typedef struct { short a; long b; char c; } myStruct;

7 Antworten

For the 64 bit system, typedef struct { short a; //2 bytes long b; //8 bytes char c; //1 bytes } As alignment is due to largest type : 2 bytes(short) + 6bytes(padding to achieve 8 byte boundry) + 8bytes(long) + 1byte(char) + 7 bytes(extra padding to achieve 8 byte boundry) = 24bytes Weniger

if we using 32 bit the answer defiantly will be 7+1 for padding -> 8 bytes if we using 64 bit the answer will be 17+7 for padding =24 bytes Weniger

I guess its 18 as byte padding will happen for the char (2 for short, 8 for long, 8 byte for padded char) Weniger

Anzeigen Mehr Antworten
Apple

reverse bits of an integer that is a power of 2 , keeping complexity in mind.

4 Antworten

rev_n = n ^ (~(n*0));

int reverse(int n) { int msb=Math.log(n)/Math.log(2); return Math.pow(2, 32-msb); } Weniger

if the bits that need to be reversed are just the ones to the right of the 1 so all you need to do is: return n -1; 1000 -> 0111 1 -> 0 10 -> 1 10000000 -> 1111111 Weniger

Anzeigen Mehr Antworten
Valeo

What are different types of interrupts?

4 Antworten

External &Internal Interrupt

1- External Interrupts: These types of interrupts generally come from external input / output devices which are connected externally to the processor. They are generally independent and oblivious of any programming that is currently running on the processor. 2- Internal Interrupts: They are also known as traps and their causes could be due to some illegal operation or the erroneous use of data. Instead of being triggered by an external event they are usually triggered due to any exception that has been caused by the program itself. Some of the causes of these types of interrupts can be due to attempting a division by zero or an invalid opcode etc. 3- Software interrupts: These types if interrupts can occur only during the execution of an instruction. They can be used by a programmer to cause interrupts if need be. The primary purpose of such interrupts is to switch from user mode to supervisor mode. Weniger

Cyclic and Eventual. (this answer is not the best, because it describes when an interrupt occurs. It should be that there are software interrupts and hardware interrupts). Weniger

Anzeigen Mehr Antworten
Trakm8 Holdings

Q1- Use of Volatile keyword?

4 Antworten

volatile your a. ., does that count I used it

wrong answer, adjective, adjective, should be removed, constructive answer: exclude from optimising Weniger

"volatile" keyword in C/C++ is used for any variable whose value can change anytime unexpectedly for example variables used in ISR, Memory mapped peripheral registers and variables used by multiple threads in RTOS based applications. Weniger

Anzeigen Mehr Antworten
Robert Bosch India

why should i hire you

4 Antworten

i too attened the interview on the same date . Now i have been called for managerial round. what questions thy asked u in managerial round. can u please tell Weniger

they asked puzzles based on real time scenario.they will check your attitude and decision making skills. Weniger

when you attended the interview .is it on 30th may 2015 ?

Anzeigen Mehr Antworten
Apple

Is the given number a bitwise palindrome?

4 Antworten

I took it as without proceeding zeroes. Also, you can cut the cycles in half by only going halfway through the bits. uint8_t isPalindrome(uint input) { uint msb = log2(input); for (int i = 0; i < msb / 2; i++) { uint8_t left = ((1 << (msb - i)) & input) != 0 ? 1 : 0; uint8_t right = ((1 << i) & input) != 0 ? 1 : 0; if (left != right) { return 0; } } return 1; } Weniger

#include int main(void) { //1001001 int num = 0x49246; int count = 0; int a = num; while(a > 0){ printf("%d\n", a & 1); a >>= 1; count += 1; } int left = 0, right = count - 1; while (left > left) & 1) != ((num >> right) & 1)){ printf("No"); return 1; } left += 1; right -= 1; } printf("Yes"); return 0; } Weniger

boolean isPalindrome(int n) { for(int i=0; i<32; i++) { int temp1=n&(1< Weniger

Anzeigen Mehr Antworten
NVIDIA

will cache affect memory I/O register?

4 Antworten

cache affects memory I/O reg. When using peripherals you want memory accesses to happen in a certain order (mostly because of hardware constraints) so you want to avoid reordering. This is exactly what you would expect cache to do; temporarily store instructions and perform optimizations by grouping/reordering. You might get unexpected errors because of this. Weniger

Depends if the I/O register is memory mapped, processor type and a host of other things.. Weniger

this is related to cache coherency.

Anzeigen Mehr Antworten
Qualcomm

A brain teaser question where we have to find out 45 minutes with the help of two ropes. Given that one rope burns completely in 1 Hr and the rate or burning is not consistent.

4 Antworten

Burn first rope from both ends, and second rope from one end only. When First has completely burned, 30 mins will have passed and second rope will have 30 mins left on it. Now burn second rope, which has burned for 30 mins already, from both ends, this will burn a 30 minute rope at twice speed, making it complete in 15 mins. This will be 45 minutes total. Weniger

I've faced same question in ASSIA interview

I assume that both ropes have the same non consistency. If you burn from one end it takes 1H. If you burn the first rope from both ends it takes 1/2 H. Immediately after the first rope burnt, burn the second rope from one end and the middle point that fires reached each other in the first rope. To get 1/4 H, burn it from both ends and the point that in the first rope the fires got together. Weniger

Anzeigen Mehr Antworten
Cohere Technologies

“You have all of the prices for a given stock for the next year. You can buy once and sell once in that year. How do you determine when to buy and sell to maximize your profit?”

3 Antworten

That answer does not work if the lowest price occurs _after_ the highest price. You have to evaluate the difference in price for each combination of days and find out which one results in the highest gain. You always assume that for whichever day you buy, the sell date will be _after_ that date. So you compare day 1 with days 2-365 and find the max gain for those combinations. Then you do the same for a buy on day 2, 3...etc. You'll end up with 364 max value date pairs. Now sort for the highest and use that combination for your best gain. Too bad it doesn't work that way in real life :) Weniger

Buy when its at the lowest and sell when its at the highest.

Declined

Fitbit

What does memcpy return?

3 Antworten

It returns an integer - the status of the operation

The key in these questions is to cover the fundamentals, and be ready for the back-and-forth with the interviewer. Might be worth doing a mock interview with one of the Fitbit or ex-Fitbit Embedded Software Engineer experts on Prepfully? They give real-world practice and guidance, which is pretty helpful. prepfully.com/practice-interviews Weniger

A pointer to dest so that memcpy could be used as an argument in another function. Weniger

1 - 10 von 2.724 angezeigt Fragen im Vorstellungsgespräch